pH Increaser for Hot Tub, 1-Pound

This product is designed for increasing the pH levels in spa water. It is essential for the water in the spa to maintain a pH range of 7.2-7.8 and a total alkalinity between 80-140 ppm. It is recommended to regularly test the water using a suitable test kit to ensure that the pH levels are at the appropriate range. This product is compatible with all sanitizers, including bromine, chlorine, and biguanide. It is advised to use this product if the pH level is below 7.2.

To use this product, follow these steps: 1. Turn on the air blower, jets, or filter system. 2. Mix 1 ounce of this product with water in a plastic pail and then add the diluted product to the spa. 3. Test the water again after 30 minutes to check the pH level. 4. Repeat steps 1-3 until the pH and total alkalinity are within the recommended range of 7.2-7.8 and 80-140 ppm, respectively.

If the pH level is below 7.2, add 1 ounce of this product and retest the water every 30 minutes until the pH and total alkalinity are within the appropriate range of 7.2-7.8 and 80-140 ppm, respectively. This product is specifically formulated to address pH levels that fall below 7.2.

product information: